Before Passport photo quality, back up the original, confirm format/size/quality requirements and close programs that lock the file. Sharp, low-noise and not over-smoothed; both pixels and print size must meet the spec.
Why it matters
Poor preparation leads to overwrites, failures and rework.
Front cameras may not be sharp enough.
Step by step
- Confirm the official size, background and head ratio; save the official page.
- Shoot with even frontal light; avoid shadows, red-eye and backlight.
- Crop to the spec so head height is roughly 60-70% of the frame.
- Export a 300dpi JPG and check sharpness/color/background.
- Print a 4x6 sheet, cut to size and verify the physical dimensions.
Common mistakes
- Checking pixels but not millimeters, so the print size is wrong.
- Shadowed/gradient background or the wrong color.
- Head too small/large or the crop ratio is wrong.
- Using beauty filters that change the actual appearance.
Checklist
- Size/background/head ratio match the official spec.
- Front-facing, eyes open, neutral expression.
- Even light with no shadows/glare.
- 300dpi output with correct print dimensions.
- Keep the original and verify the print.
Key facts
- Front cameras may not be sharp enough.
- Beauty filters change appearance and may be rejected.
FAQ
How should I prepare before Passport photo quality?
Before Passport photo quality, back up the original, confirm format/size/quality requirements and close programs that lock the file. Sharp, low-noise and not over-smoothed; both pixels and print size must meet the spec.
How long does it take?
Usually 1-3 minutes; for intermittent issues, run 30 seconds and retest elsewhere.
Is data uploaded?
Runs locally and does not upload video/audio; extensions may still read the page.
Source: ICAO