Home/Answers/Passport photo quality
PHOTO LAB / Passport photo quality

Passport photo quality for Beginners

For your first Passport photo quality task, do not change many settings: run defaults once, then adjust one item at a time.

Updated 2026-10-31About 3 minLocal test
Quick answer

For your first Passport photo quality task, do not change many settings: run defaults once, then adjust one item at a time. Sharp, low-noise and not over-smoothed; both pixels and print size must meet the spec.

Why it matters

Change one variable at a time so you know which setting matters.

Front cameras may not be sharp enough.

Step by step

  1. Confirm the official size, background and head ratio; save the official page.
  2. Shoot with even frontal light; avoid shadows, red-eye and backlight.
  3. Crop to the spec so head height is roughly 60-70% of the frame.
  4. Export a 300dpi JPG and check sharpness/color/background.
  5. Print a 4x6 sheet, cut to size and verify the physical dimensions.

Common mistakes

  • Checking pixels but not millimeters, so the print size is wrong.
  • Shadowed/gradient background or the wrong color.
  • Head too small/large or the crop ratio is wrong.
  • Using beauty filters that change the actual appearance.

Checklist

  • Size/background/head ratio match the official spec.
  • Front-facing, eyes open, neutral expression.
  • Even light with no shadows/glare.
  • 300dpi output with correct print dimensions.
  • Keep the original and verify the print.

Key facts

  • Front cameras may not be sharp enough.
  • Beauty filters change appearance and may be rejected.

FAQ

How do I start with Passport photo quality?

For your first Passport photo quality task, do not change many settings: run defaults once, then adjust one item at a time. Sharp, low-noise and not over-smoothed; both pixels and print size must meet the spec.

How long does it take?

Usually 1-3 minutes; for intermittent issues, run 30 seconds and retest elsewhere.

Is data uploaded?

Runs locally and does not upload video/audio; extensions may still read the page.

Source: ICAO