Choose Passport photo quality by use case and compatibility first, specs second; test locally when possible. Sharp, low-noise and not over-smoothed; both pixels and print size must meet the spec.
Why it matters
Stacked specs do not guarantee fit for your use case.
Front cameras may not be sharp enough.
Step by step
- Confirm the official size, background and head ratio; save the official page.
- Shoot with even frontal light; avoid shadows, red-eye and backlight.
- Crop to the spec so head height is roughly 60-70% of the frame.
- Export a 300dpi JPG and check sharpness/color/background.
- Print a 4x6 sheet, cut to size and verify the physical dimensions.
Common mistakes
- Checking pixels but not millimeters, so the print size is wrong.
- Shadowed/gradient background or the wrong color.
- Head too small/large or the crop ratio is wrong.
- Using beauty filters that change the actual appearance.
Checklist
- Size/background/head ratio match the official spec.
- Front-facing, eyes open, neutral expression.
- Even light with no shadows/glare.
- 300dpi output with correct print dimensions.
- Keep the original and verify the print.
Key facts
- Front cameras may not be sharp enough.
- Beauty filters change appearance and may be rejected.
FAQ
How do I choose Passport photo quality?
Choose Passport photo quality by use case and compatibility first, specs second; test locally when possible. Sharp, low-noise and not over-smoothed; both pixels and print size must meet the spec.
How long does it take?
Usually 1-3 minutes; for intermittent issues, run 30 seconds and retest elsewhere.
Is data uploaded?
Runs locally and does not upload video/audio; extensions may still read the page.
Source: ICAO